LG DN898 Owner's Manual (English) - Page 12

DV392H-N.CUSALLK_0959_ENG 2/20/08 9:37 AM Page 12 Watching a enlarged video image DVD MPEG4 During playback or pause mode, press ZOOM repeatedly to select zoom mode. You can move through the zoomed picture using vVb B buttons. Press CLEAR to exit. Viewing the title menu DVD Press TITLE to display the disc's title menu, if available. Viewing the DVD menu DVD Press DVD MENU to display the disc menu, if available. Marking a favorite scene DVD MPEG4 You can mark positions by pressing MARKER at the desired position up to 9 markers. Also you can recall or clear positions by pressing SEARCH. Use b or B to select a desired marker on the [MARKER SEARCH] menu, then press ENTER to recall it or CLEAR to clear it. Starting play from selected time DVD MPEG4 Searches for the starting point of entered time code. Press DISPLAY then select clock icon. Enter a time then press ENTER. For example, to find a scene at 1 hours, 10 minutes, and 20 seconds, enter "11020" and press ENTER. If you enter the wrong number, press CLEAR to enter again. Last Scene Memory DVD ACD This unit memorizes last scene from the last disc that is viewed. The last scene remains in memory even if you remove the disc from the player or switch off the unit. If you load a disc that has the scene memorized, the scene is automatically recalled. Screen Saver The screen saver appears when you leave the unit in Stop mode for about five minutes. If the Screen Saver is displayed for five minutes, the unit automatically turns itself off. Mixed disc or USB Flash Drive - MPEG4, MP3/WMA and JPEG When playing a disc or USB Flash Drive contained with MPEG4, MP3/WMA and JPEG files together, you can select which menu of files you would like to play by pressing TITLE. Playing MPEG4 movie file 1 Open the disc tray: 2 Insert a disc: 3 Close the disc tray: 4 Select a movie file from the menu: 5 Start playback: 6 To stop playback: ON REMOTE Z OPEN/CLOSE Z OPEN/CLOSE v V, DVD MENU N PLAY x STOP Playing MPEG4 movie files more you can do Changing the character set to display MPEG4 subtitle correctly Press and hold SUBTITLE for 3 seconds during playback. The language code will appear. Press b B to select another language code until the subtitle is displayed properly and then press ENTER. MPEG4 file requirement This unit does not support the DivX file. MPEG4 file compatibility with this player is limited as follows: • Available resolution size: 720x576 (W x H) pixel • The file names of MPEG4 and subtitle are limited to 20 characters. • MPEG4 file extensions: ".avi", ".mpg", ".mpeg" • Playable MPEG4 subtitle: SubRip (.srt / .txt), SAMI (.smi), SubStation Alpha (.ssa/.txt), MicroDVD (.sub/.txt), SubViewer 2.0 (.sub/.txt), TMPlayer (.txt), DVD Subtitle System (.txt), VobSub(*.sub) Sub/idx, stream based format • Playable Audio format: "Dolby Digital", "DTS", "PCM", "MP3", "WMA" • Sampling frequency: within 8 - 48 kHz (MP3), within 22 - 48 kHz (WMA) • Bit rate: within 8 - 320 kbps (MP3), within 32 - 256 kbps (WMA), less than 6Mbps (MPEG4 file) • CD-R/RW, DVD±R/RW Format: ISO 9660 • Maximum Files/Disc: Less than 650 (total number of files and folders) 12