LG DU-50PY10 Owners Manual - Page 14
Analog, Digital, signals, provided, connecting
View all LG DU-50PY10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Installation 3. Analog f and Digital TV signals provided Antenna on able and antenna Bronze Wire Cable TV Wall Jack TUrn clockwise to tighten. RF Coaxial Wire (75 ohm) I , In a _or signal area to improve picture qualitj; purchase and install a signal amplifier. * If the ar4enna needs to be spf_ for two TV's, install a "2Way Signal Splitter '_in the connections. * ff the antenna is not installed properly, contact your deaf er for assistance. Note: The TV will let you know when the analog cable, and digital channet scans are complete. o To avoid picture noise (interference), _eave an adequate distance between the VCR and TV - Use the tSM Method (on the Option menu) feature to avoid having a fixed i_ge remain on the screen for a long period of tirr_, if the 4:3 picture format is used; the fixed images on the sides of the screen may remain visibte on the screen, Connection Option 1 Set VCR output switch to 3 or 4 and then tune TV to the same channel number, Connection Option 2 1, Connect the audio and video cabtes f_om the VCR's output _acks to the TV input jacks, as shown in the figure, When connecting the TV to VCR match the jack colors (Video = yetlow, Audio Left = white, and Audio Right = red) If you connect an S-VIDEO output from VCR to the S-VIDEO input, the picture quality is improved; compared to connecting a regular VCR to the Video input_ 2, Insert a video tape into the VCR and press PLAY on the VCR (Refer to the VCR owner's manuaJ ) 3, Select the input source with using the TV/VlDEO button on the remote control. connected to AiV iNPUT, select Video sou rce) (If input Do not connect to _th Video and S-Video at: the same time. [] [] VCR Rear 14 Plasma TV