LG GCC-4520B Owners Manual - Page 8

DirectCDTM v2.5b(s) Introduction Location and Function of Controls Front Panel 6 5 12 34 1. Headphone Jack 2. Volume Control 3. Emergency Eject Hole 4. Stop/Eject Button 5. Disc Tray 6. Drive activity indicator (Read/Write) Rear Panel DIGITAL AUDIO R ANALOG AUDIO G L C S S L M A 39 40 D G INTERFACE 1 POWER +5 GND +12 2 12 3 4 5 1. Digital Audio Output Connector 2. Analog Audio Output Connector 3. Jumper Connector This jumper determines whether the drive is configured as a master or slave. Changing the master-slave configuration takes effect after power-on reset. 4. IDE Interface Connector Connect to the IDE (Integrated Device Electronics) Interface using a 40-pin flat IDE cable. NOTE : Do not connect or disconnect the cable when the power is on, as this could cause a short circuit and damage the system. Always turn the power OFF when connecting or disconnecting the cable. 5. Power Connector 5