LG HBS-700 User Manual - Page 4

ENG How to use • The LED indicator will be Solid Blue c) On the device you wish to pair, find the bluetooth menu and "serch for" or "add" new devices d) Select "LG HBS-700" From the list of devices e) If asked for a Pass/Pin Code enter 0000 (4 Zero's) f) Once pairing is complete you will hear a beep • The HBS-700 will automatically turn off if not paired within 3 minutes. 2) Manual Pairing (Pairing with another phone or re-pairing) a) With the Power off, press the CALL button and move the power switch to the 'ON' position at the same time for 4 seconds. b) When the headset enters Pairing Mode, the LED indicator will show a solid blue light. After the procedure repeat Easy Pairing steps c through f. Multi-connection - In Multi-Connection mode, only one device can be used to make/receive calls, and the other connected device can only be used for streaming Audio. - To enter Multi-Connection mode: 1. Connect your HBS-700 to the device you wish to use for making calls. 2. Power off the HBS-700 3. Place your HBS-700 into pairing mode and pair/connect to a Bluetooth Stereo enabled audio device (not your handset). (This Bluetooth Stereo enabled audio device must only support the A2DP/AVRCP profiles, not the headset/handsfree profiles) 4. Once the Bluetooth Stereo enabled device is paired and connected, press the CALL button once briefly on the HBS-700 to reconnect with the handset (only the headset/hands-free profile will connect). 5. The handset is now paired with the headset/hands-free profile of the HBS-700. The Bluetooth Stereo enabled audio device is paired with A2DP/AVRCP stereo profiles. 6 How to use * NOTE: In order to access Multi-Connection mode, at least one of the two devices you are trying to connect to the HBS-700 must be able to select a profile, OR one of the two devices must only support one profile (Either Headset/Hands-Free or A2DP/AVRCP). For example: Two handsets which support both the Headset/Hands-Free and A2DP/AVRCP profiles cannot be connected to the HBS-700 simultaneously. But, one handset supporting Headset/Hands-Free/A2DP/AVRCP and a Bluetooth Stereo Dongle supporting only A2DP/AVRCP is OK. Auto reconnect - If the HBS-700 is turned off (either accidentally or intentionally) while connected to a handset, the headset and handset will disconnect. The headset and handset will automatically reconnect when the HBS-700 is turned back on while in range. Out of range - If the paired Devices are separated by a range of 33 feet (10 meters) or more, the headset and handset will disconnect. - If the headset and handset do not automatically reconnect when they are back within the required range, briefly press the CALL button on the HBS-700 to reconnect manually. Audio streaming Play - Briefly press the PLAY/PAUSE/STOP Button. Pause - While playing music, briefly press the PLAY/PAUSE/STOP button. Stop - While playing music, press and hold the PLAY/PAUSE/STOP button for 1 second. Next Song - Briefly press the FF button. Previous song - Briefly press the REW button. 7 ENG