LG HS101 Owner's Manual - Page 14
Turning on the Projector, Focus and Position of the Screen Image, Selecting source mode, SOURCE, POWER - led
View all LG HS101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Installing and Composition Turning on the Projector 1. Connect power cord correctly. 2. Press the POWER button( ) on the Control panel. (The light on the control panel will be turned on.) q Use the SOURCE button on the control panel to select the input signal you want. q When you press the POWER button( ) on the control panel when you turn on the projector, the lights for all buttons on the control panel will be turned on. Turning off the Projector 1. Press the POWER button( 2. Press the POWER button( ) on the Control panel. ) on the Control panel again to turn off the power. q When you press the POWER button( ) on the control panel when you turn off the projector, the lights for all the buttons on the control panel will be turned off. When you press any button on the control panel when the projector is turned off, the light only on the POWER LED will be turned on. (When the Power cord is connected.) Power off? Please Press Key Again. Focus and Position of the Screen Image When an image appears on the screen, check if it is in focus and fits well to the screen. Focus ring q To adjust the focus of the image, rotate the focus ring which is the outer ring on the lens. Selecting source mode 1. Press the SOURCE button. Select OK F RGB G 2. Each press of the F, G button changes the display as below. RGB Digital Video Video q When you connect the RGB to Component cable to the RGB IN (PC/DTV) terminal and select RGB input, you can receive the Component input. q Digital video is the signal to receive and display the digital video signal through the HDMI jack. 14