LG HS101 Owner's Manual - Page 17

Function Function * In this manual, the OSD(On Screen Display) may be different from your Projector's because it is just an example to help with the Projector operation. * If there is no input signal present, the Menu will not be displayed. * This operating guide explains operation of RGB(PC) mode mainly. Video Menu Options Adjusting Video 1. Press the MENU button( ) and then use F, G button to select the menu. 2. Press the D , E button to select a video item you want to adjust. 3. Press the F, G button to adjust the screen condition as you want. q Each adjustment of menu options will not affect other inputs. As required, re-adjust menu options for the following input source : Video/Component (480i(576i)), Component (480p(576p), 720p, 1080i) q To restore the original image condition after changing it, press AOK button after selecting [Reset] item. q When receiving an NTSC signal, the picture item Tint is displayed and can be adjusted.(60Hz only) q To exit the menu display, repeatedly press the MENU button( ). < RGB mode > Contrast 50 Brightness 50 Color R 50 Color G 50 Color B 50 Reset MENU Exit F G Move OK < Video mode > APC Contrast Brightness Color Sharpness Tint F Clear G 80 50 50 70 0 MENU Exit F G Move OK APC (Auto Picture Control) * Use APC to set the projector for the best picture appearance. * This function will not work at the RGB mode and the Digital video mode. 1. Press the MENU button( ) and then use F, G button to select the menu. 2. Press the D , E button to select APC item. 3. Press the F, G button to adjust the screen condition as you want. q Each press of the D, E button changes the screen as shown below. Clear Soft User q To exit the menu display, repeatedly press the MENU button( ). APC Contrast Brightness Color Sharpness Tint MENU Prev. F Clear G 80 50 50 70 0 D E Move F G Select 17