LG L1950S-SN User Guide - Page 32

Table 4-2 OSD Menu (continued) Icon Main Menu Video Input Control (select models) Information Factory Reset Exit Submenu Sleep Timer Description Provides the timer adjustment menu options: ● Set Current Time-sets the current time in hours and minutes ● Set Sleep Time-sets the time you want to place the monitor in sleep mode ● Set on Time-sets the time you want the monitor to wake up from sleep mode ● Timer-sets the Sleep Timer feature On or Off. The default setting is Off. ● Sleep Now-immediately sets the monitor to enter sleep mode Selects the video input signal. DVI is the factory default. Switch Video Input Analog - VGA - Selects VGA input Digital - DVI - Selects DVI input. This input accepts either analog or digital signals. Disable/Enable AutoSwitching Enables or disables the system's automatic video signal input-switching feature. The factory default is enabled. Default Video Input Selects the default or primary video input signal when the monitor is connected to two active and valid video sources. The monitor will automatically determine the video format. The default input selection is DVI. Analog - VGA - Selects VGA input. Digital - DVI - Selects DVI input. Selects and displays important information about the monitor. Current Settings Provides the current input video mode. Recommended Settings Provides the recommended resolution mode and refresh rate for the monitor. Serial Number Reports the serial number of the monitor. The serial number is needed if contacting HP technical support. Version Reports the firmware version of the monitor. Backlight Hours Reports the total hours of backlight operation. Service Support: http:// www.hp.com/support Returns all OSD menu settings and DDC/CI controls to the factory default settings, except the Language. Exits the OSD menu screen. 26 Chapter 4 Operating the Monitor