LG LDG3016ST Owner's Manual - Page 44
Symptoms and Questions, Possible Cause/Solution
View all LG LDG3016ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
44 BEFORE REQUESTING SERVICE Symptoms and Questions Too much smoke during the self clean cycle. The oven door does not open after a self clean cycle. The oven door is not clean after a self clean cycle. "CLOSE DOOR TO CONTINUE BROILING" or "DOOR OPENED" appears in the display. "DOOR LOCKED" message appears when you want to cook. Oven control beeps and displays an F error code. The oven racks were cleaned in a self clean cycle. Clock is flashing. "Burning" or "oily" odor emitting from the vent. Strong odor. Fan noise (convection models) Convection fan not working (convection models). Burners are not lighting properly after cleaning the cooktop surface. Possible Cause/Solution Too much soil in the oven. Open the windows to get rid of the smoke from the room. Press the Y or Z key. Wait until the m light goes off before trying to open the oven door. Wipe up the excess soil and reset the clean cycle. The oven temperature is too high. Wait up to one hour to cool down. yy Incorrect oven control settings. See "SELF CLEAN" in the Care and Cleaning section. yy The oven was heavily soiled. Clean up heavy spills before beginning the self clean cycle. Heavily soiled ovens may need either a longer self clean or two self clean cycles. Close the oven door. The oven door is locked because the temperature inside of the oven is too high. Press the Y or Z key. yy Press the Y or Z key and wait for one hour. yy Check the main gas shut-off valve or the oven gas shut-off valve and call for service. yy Remove the power from the range for five minutes and then reconnect the power. If the function error code repeats, call for service. Apply a small amount of vegetable oil to a paper towel and wipe the edges of the oven racks. Do not use lubricant sprays. Power outage or surge. Reset the clock. If the oven was in use, you must reset it by pressing the Y or Z key. Reset the clock and any cooking function. This is normal in a new oven. To speed the process, set a self clean cycle for a minimum of three hours. See "SELF CLEAN" in the Care and Cleaning section. An odor from the insulation around the inside of the oven is normal for the first few times the oven is used. The convection fan may turn on and off automatically. This is normal. The preheating temperature has not been reached. The Fan will start automatically once the preheating temperature is reached. Make sure that the burner heads and caps are completely dry and properly positioned.