LG LDX-514 Owners Manual - Page 41

Symptom The DVD+VCR does not start playback. Cause No disc is inserted. No tape is inserted. An unplayable disc is inserted. The disc is placed upside down. The disc is not placed within the guide. The disc is dirty. The Rating level is set. Video tape cannot be inserted. No Hi-Fi sound Is the cassette compartment empty? Audio mode is not set properly. The remote control does not work properly. Camcorder image is not shown. Camcorder image via AV input to DVD+VCR is not shown on TV screen. Timer recording is not possible. There is an obstacle in the path of the remote control and this unit. The batteries in the remote control are exhausted. The remote control is not pointed at the remote sensor of the DVD+VCR. The remote control is too far from the DVD+VCR. This remote control use the same buttons for VCR and DVD functions (ex.PLAY). Camcorder is off. DVD+VCR SOURCE SELECT is not set to LINE1 or LINE2. Clock in DVD+VCR is not set to correct time. Timer has been programmed incorrectly. indicator light does not appear after programming timer. Correction Insert a disc or tape. (Check that the disc or tape indicator in the display window is lit.) Insert a playable disc. (Check the disc type and Regional code.) Place the disc with the playback side down. Place the disc on the disc tray correctly inside the guide. Clean the disc. Cancel the Rating function or change the Rating level. Eject the tape in. Select STEREO by repeatedly pressing AUDIO on the remote control. Remove the obstacle. Replace the batteries with new ones. Point the remote control at the remote sensor of the DVD+VCR. Operate the remote control within 23ft (7m). When using a VCR, first press the VCR button. When using a DVD, first press the DVD button. Turn camcorder on and operate properly. Press INPUT to select LINE input channel (LINE1 or LINE2). Set clock to correct time. Reprogram Timer. Reprogram Timer and turn DVD+VCR off to enable timer. Reference 41