LG LFCC22426S Owners Manual - Page 25

ENGLISH 9 Connect the tubing to the refrigerator. NOTE ••Before making the connection to the refrigerator, be sure that the refrigerator power cord is not plugged into the wall outlet. ••Remove the plastic flexible cap from the water valve. ••Place the compression nut and ferrule (sleeve) onto the end of the tubing as shown. ••Insert the end of the copper tubing into the connection as far as possible. While holding the tubing, tighten the fitting. Tubing Clamp ¼ in. Tubing INSTALLATION 25 Leveling and Door Alignment Leveling The refrigerator has two front leveling legs. Adjust the legs to alter the tilt from front-to-back or side-to side. If the refrigerator seems unsteady, or the doors do not close easily, adjust the refrigerator's tilt using the instructions below: 1 Turn the leveling leg to the left to raise that side of the refrigerator or to the right to lower it. It may take several turns of the leveling leg to adjust the tilt of the refrigerator. ¼ in. Compression Nut Ferrule (sleeve) Refrigerator Connection 10 Turn the water on at the shutoff valve. Tighten any connections that leak. NOTE ••A flare nut wrench works best, but an open-end wrench will suffice. Do not over-tighten. 2 Open both doors and check to make sure that they close easily. If the doors do not close easily, tilt the refrigerator slightly more to the rear by turning both leveling legs to the left. It may take several more turns, and be sure to turn both leveling legs the same amount. CAUTION ••Check for leaks at all water line connections.