LG LFCC22426S Owners Manual - Page 47
Problem, Possible Cause, Solutions
View all LG LFCC22426S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
TROUBLESHOOTING 47 ENGLISH Ice & Water Problem Icemaker is not making ice Ice has bad taste or odor. Icemaker is making too much ice. Possible Cause The ice detecting sensor is obstructed. The refrigerator is not connected to a water supply or the supply shutoff valve is not turned on. Icemaker shutoff (arm or sensor) obstructed. Reverse osmosis water filtration system is connected to your cold water supply. Water supply contains minerals such as sulfur. Icemaker was recently installed. The food has not been stored properly in either compartment. The interior of the refrigerator needs to be cleaned. The ice storage bin needs to be cleaned. Icemaker shutoff (arm/ sensor) is obstructed. Solutions ••Foreign substances or frost on the ice-detecting sensor can interrupt ice production. Make sure that the sensor area is clean at all times for proper operation. ••Connect the refrigerator to the water supply and turn the water shutoff valve fully open. ••If your icemaker is equipped with an ice shutoff arm, make sure that the arm moves freely. If your icemaker is equipped with the electronic ice shutoff sensor, make sure that there is a clear path between the two sensors. ••Reverse osmosis filtration systems can reduce the water pressure below the minimum amount and result in icemaker issues. (Refer to the Connecting the Water Line section.) ••A water filter may need to be installed to eliminate taste and odor problems. NOTE: In some cases, a filter may not help. It may not be possible to remove all minerals/ odor/taste in all water supplies. ••Ice that has been stored for too long will shrink, become cloudy, and may develop a stale taste. Throw away old ice and make a new supply. ••Rewrap the food. Odors may migrate to the ice if food is not wrapped properly. ••See the Maintenance section for more information. ••Empty and wash the bin (discard old cubes). Make sure that the bin is completely dry before reinstalling it. ••Empty the ice bin. If your icemaker is equipped with an ice shutoff arm, make sure that the arm moves freely. If your icemaker is equipped with the electronic ice shutoff sensor, make sure that there is a clear path between the two sensors. Reinstall the ice bin and wait 24 hours to confirm proper operation.