LG LFCS22520S Owners Manual - English - Page 13
Removing/Assembling the, Freezer Drawer Handle, Doors and Drawers
View all LG LFCS22520S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
13 INSTALLATION ENGLISH Removing/Assembling the Freezer Drawer Handle Removing/Assembling the Doors and Drawers Removing the Handle 1 Loosen the set screws located on the lower side of the handle with a 3/32 in. (2.5mm) Allen wrench and remove the handle. When it is necessary to move the refrigerator through a narrow opening, removing the doors is the recommended procedure. WARNING 2 Loosen the mounting fasteners that connect to the freezer drawer and handle using a 1/4 in. (6.35 mm) Allen wrench, and remove the mounting fasteners. Assembling the Handle 1 Assemble the mounting fasteners at both ends of the handle using a 1/4 in. Allen (6.35 mm) wrench. 2 handle footprints over the mounting fasteners and tightening the set screws with a 3/32 in. (2.5 mm) Allen wrench. If your entrance door is too narrow for the refrigerator to pass through, remove the refrigerator doors and move the refrigerator side ways through the doorway. Use two or more people to remove and install the refrigerator doors. Failure to do so can result in back or other injury. Disconnect the electrical supply to the refrigerator before installation. Failure to do so could result in serious injury or death. Do not put hands, feet or other objects into the air vents or bottom of the refrigerator. You may be injured or receive an electrical shock. Be careful when handling the hinge and stopper. You may be injured. Remove food and bins before detaching the doors and drawers. WARNING When assembling or disassembling the handle: Grasp the handle tightly to avoid dropping it. Do not swing the handle into nearby people or animals. Make sure that the bracket hole of the bolt of the door. Assemble the set Make sure that there is not a gap between the door and handle after assembling the handle.