LG LH-T9654S Owners Manual - Page 23

Sleep Timer Setting You can set the DVD/CD Receiver to turn off automatically at a specified time. 1. Press SLEEP to set the desired sleep time. The SLEEP indicator and sleep time appears in the display window. 2. Each time you press SLEEP the setting changes in the following order. SLEEP 180 →150 →120→90 →80 → 70 → 60→ 50 → 40 → 30 → 20 →10 →OFF Note: You can check the time remaining before the DVD/CD Receiver turns off. Press SLEEP. The remaining time appears in the display window. Dimmer This function will change the brightness of the display window on the front panel during in power-on status. Press the DIMMER repeatedly. Mute Press MUTE to mute your unit. You can mute your unit in order, for example, to answer the telephone, "MUTE" indicator flashes in the display window. Using Headphone Jack Connect a stereo headphone plug ( 3.5mm) into the PHONES connector. The speakers are automatically disabled when you plug in headphones (not supplied). Selecting input source You can use VCRs or other units connected to the AV IN or Optical connector. Refer to the Owner's Manual supplied with the unit for further information on the operation. Press AUX repeatedly on the Remote Control to select the desired input source. Each time you press this button, the mode of the function changes in the following sequence: AV 1/2 : for selecting the analog signal from AV1/2 AUDIO IN (L/R) & VIDEO IN Connectors. AV 2 OPT: for selecting the optical digital signal from AV2 VIDEO IN & OPTICAL IN Connector. Notes: The Optical input function is available only when the other unit's Sampling Frequency is 32 ~ 96kHz. You can also select the input source by pressing FUNC. button on the front panel. Press and hold down this button about 3 seconds, then press repeatedly to select input source. XTS/XTS pro Each time you press XTS pro the setting changes in the following order. XTS ON → NORMAL → XTS-P ON... XTS-P ON The unique sound quality of the LG Technology creates the optimum sound for you to play the perfect playback of the original sound and to feel the living sound source. XTS ON When playing the movie with the weak bass sound relatively to the general music, it enforces the sense of sound at woofer for you to satisfy with. In the mode of 2 CH BYPASS, It creates the high display effect by playing the sound source via the rear speakers same as the front speakers. Note: The XTS mode is temporarily disabled when changing from 2.1 CH to 5.1 CH and it is enabled when changing it to 2.1 CH. VIRTUAL sound press VIRTUAL the setting VIRTUAL sound. Source 2.1 ch. 5.1 ch Display VIRTUAL VIRTUAL Effect 3D STEREO Multichannel sound 3D STEREO Realtime 3D positioned sound rendering technology with stereo sources, optimized for stereo speakers. Listeners may experience amazing virtual surround effects with their own multimedia players. Multichannel sound The Multichannel sound makes a 5.1 ch feel 10.1 ch sound therefore this mode provides a emotion which you are involved with sound and you can feel detailed sound. Sound Mode You can enjoy surround sound simply by selecting one of the pre-programmed sound fields according to the program you want to listen to. (2 ch. sound only) BYPASS → ON STAGE → STUDIO → CLUB → HALL → THEATER 1 → CHURCH → PL ll MOVIE → PL ll MUSIC → PL ll MTRX →BYPASS... Note: Initial sound mode is BYPASS Operation 23