LG LHT874 Owner's Manual (English) - Page 8

HE903PAW-AP_BUSALLK 2/1/08 7:54 PM Page 8 LED indicator of Wireless Transmitter LED color BLUE RED OFF (No display) Operation The main set is turned on, everything is connected and transmitting. The wireless transmitter is in standby mode. The DC cable is disconnected to the unit. LED indicator of Wireless Receiver LED color BLUE RED OFF (No display) Operation The Wireless Receiver is receiving a signal of Wireless transmitter. The Wireless Receiver is in standby mode. The Wireless Receiver is turned off. Setting an ID of Wireless Transmitter When the unit is manufactured, the ID is already set. If an interference occurs or you use a new Wireless Receiver, an ID is set again. 1 Connect the SOUND SIGNAL connector of transmitter and the rear (right, left) speaker terminals of main unit with the SOUND SIGNAL cable.: 2 Connect the DC cable to the unit and transmitter.: 3 Turn off the Wireless Receiver: 4 Press the ID. for more than 3 seconds: The Blue LED indicator will quickly flicker 5 Turn on the Wireless Receiver: ON Wireless Kit POWER Switch ID. POWER Switch Be careful of the following If there is a strong electromagnetic wave product nearby, interference may occur. Put the unit (Wireless Receiver and main unit) away from there.(Ex: Microwave oven) If there is no audio signal for longer than 10 minutes, the Wireless Receiver and Wireless Transmitter will be automatically switched to standby mode. In power saving mode, both LEDs will turn red. LEDs will turn blue when there is any audio signal back. If you operate main unit then wireless speakers (rear speakers) sound within a few seconds in standby mode. 8