LG LP0723WSR Owners Manual - Page 18

18 OPERATION 1 Power ( ) Turns the air conditioner on and off. A chime sounds to confirm you have turned it on or off. 2 Mode Press this button repeatedly to toggle through and select the operating mode. Modes include Cool, Dry (dehumidify), Fan. An LED illuminates to indicate the selected mode. The default mode is Cool. Cool Compressor runs and cools the room. Use the À/Á and Fan Speed buttons to set the desired temperature and fan speed. Dry Use the Dry mode to remove humidity from the room without additional cooling. The fan speed is preset and cannot be adjusted. Fan Fan circulates air but compressor does not run. Use the Fan Speed button to set the desired fan speed to either High, Low. 3 Temperature Control À/Á In Cool, Dry mode, the À/Á buttons adjust the set temperature up to 86 °F (30 °C) or down to 60 °F (16 °C), in one-degree increments. NOTE • To switch the temperature units on the display between Fahrenheit (°F) and Celsius (°C), press and hold the À and Á buttons on the control panel at the same time for 5 seconds. 4 Fan Speed Press repeatedly to toggle the fan speed between High and Low settings. An LED illuminates to indicate the selected fan speed. The fan speed can be changed in the Cool, Fan modes. The fan speed is preset in the Dry mode. After pressing the button, there is a brief delay before the fan motor changes speed. 5 Timer Delay ON - When the air conditioner is off, set it to automatically turn on from 1 to 24 hours later, at its previous mode and fan settings. Delay OFF - When the air conditioner is on, set it to automatically turn off from 1 to 24 hours later. NOTE • When the Timer is selected, use the Ʒ.Ƹ buttons to adjust time from 1 to 24 hours, in one-hour increments. • To cancel the Timer function, press the Timer button on control panel.