LG LRE30453SB Owner's Manual (English) - Page 15
Operation - convection oven
UPC - 048231316095
View all LG LRE30453SB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
English OPERATION SETTING THE CLOCK The CLOCK pad is used to set the clock. The clock has been preset at the factory for 12 hours operation. When the range is first plugged in, or when the power supply to the range has been interrupted, the timer in the display will show with power failure PF. You can make a choice between 12-hour clock and 24-hour clock (refer to the page 16): To set the clock (example below for 1:30): 1. Press CLEAR/OFF. 2. Press CLOCK. 3. Press 1, 3, and 0 to set the time of day to 1:30. 4. Press START. The clock will start. MINIMUM & MAXIMUM CONTROL PAD SETTINGS All of the features listed have minimum and maximum time or temperature settings that may be entered into the control. An entry acceptance beep will sound each time a control pad is pressed. An entry error tone (3 short beeps) will sound if the entry of the temperature or time is below the minimum or above the maximum settings for the feature. FEATURE BAKE TEMP. BROIL TEMP. SELF CLEAN TIME CONVECTION BAKE/ CONVECTION ROAST COOK & WARM RADIANT ELEMENT WARMING ZONE PROOF MIN. TEMP. /TIME 170°F / 75°C LO (400°F) 2 hours 300°F / 150°C MAX. TEMP. /TIME 550°F / 285°C HI (550°F) 4 hours 550°F / 285°C 170°F (75°C) / 3 hours Default: 12 Hr. Default: 2 Hr. Default: 12 Hr. SETTING THE TIMER ON/OFF The TIMER ON/OFF serves as an extra timer in the kitchen that will beep when the set time has run out. It does not start or stop cooking. The TIMER ON/OFF feature can be used during any of the other oven control functions. To set the Timer (example for 5 minutes): 1. Press TIMER ON/OFF twice. 0:00 and HR inside O will appear and TIMER will flash in the display. 2. Press the number pads to set the desired time in the display (press 5). If you make a mistake press the TIMER ON/OFF and begin again. 3. Press TIMER ON/OFF. The time will count down with 5:00 and TIMER will show in the display. Note: If TIMER ON/OFF is not pressed, the timer will return to the time of day. 4. When the set time has run out, End will show in the display. The clock will sound with 3 beeps every 15 seconds until TIMER ON/OFF is pressed. Note: If the remaining time is not in the display, recall the remaining time by pressing the TIMER ON/OFF. Note: 1. If you press TIMER ON/OFF once, it allows you to set the time in seconds. (for example: if you press 5 and 6, it means 56 seconds) 2. If you press TIMER ON/OFF twice, it allows you to set the time in minutes. (for example: if you press 5 and 6, it means 56 minutes) To cancel the Timer before the set time has run out: 1. Press TIMER ON/OFF once. The display will return to the time of day. Español - 15 -