LG LRG3095ST Owner's Manual - Page 38
Burner Caps And Heads
View all LG LRG3095ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
CARE AND CLEANING OF THE RANGE BURNER CAPS AND HEADS • DO NOT use bleach on product to clean. BURNER CAPS Lift off when cool. Wash burner caps in hot, soapy water and rinse with clean water. To remove burned on food particles, you may scour with a plastic scouring pad. If you want to remove burned-on food, soak the burner heads in a solution of mild liquid detergent and hot water for 20-30 minutes. For more stubborn stains, use a toothbrush. NOTES: • DO NOT use steel wool or scouring powders to clean the burners. • Burners will not light if the cap is removed. Burner cap is properly seated. Burner cap is NOT properly seated. Dual Extra Large Burner outer cap (on some model) To place the dual extra large burner outer cap properly, make sure the slit in the burner cap is positioned over the assemble guide in the burner head. slit assemble guide BURNER HEADS AND OVAL (CENTER) BURNER HEAD/CAP ASSEMBLY AFTER CLEANING Before replacing the burner caps and burner heads shake out excess water and then dry them thoroughly. REPLACEMENT Replace burner heads and caps over the electrodes on the cooktop, in the correct locations according to their size. Oval (Center) Burner Head/Cap Assembly Small burner head and cap Medium burner head and cap (on some models) Large burner head and cap Extra large burner head and cap The burner heads and the oval burner head/cap assembly are removable. Simply lift them off the range for cleaning. For even and unhampered flame, the slits in the burner heads must be kept clean at all times. Clogged or dirty burner ports or electrodes will not allow the burner to operate properly. Any spill on or around an electrode must be carefully cleaned. Take care to not hit an electrode with anything hard or it could be damaged. You should clean the burner caps and heads routinely, especially after bad spillovers which could clog the openings. Lift them off when they are cool. Make sure the hole in the burner head is positioned over the electrode. Hole Electrode 38