LG LRTNC0705V Owners Manual - Page 11
Leveling
View all LG LRTNC0705V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
ENGLISH INSTALLATION 11 Dimensions and Clearances • Check the dimensions of the appliance and the installation path to ensure there is sufficient room to move the refrigerator through doors or narrow openings. • If an opening is too narrow to fit the refrigerator through, remove the refrigerator doors. See Removing/ Assembling Doors and Drawers in this manual. • The installation location chosen for the refrigerator should allow space behind the unit for connections and airflow and space in front to open the doors and drawers. • Too small of a distance from adjacent items may result in lowered freezing capability and increased electricity consumption charges. Allow at least 2 inches (50 mm) between the back of the refrigerator and the wall. • Remember to allow enough room in front of the refrigerator to fully open the doors. B E F A C D G - Dimensions/Clearances A Depth without Handle B Width C Height to Top of Case D Height to Top of Hinge E Back Clearance F Depth without Door G Depth (Total with Door Open 90°) LRTNC0705* 23" (585 mm) 21 7/8" (555 mm) 54 1/4" (1378 mm) 55 1/8"(1400 mm) 2" (50 mm) 19 3/4" (501 mm) 42 3/4" (1087 mm) Leveling Leveling the Refrigerator The refrigerator has two front leveling legs. Adjust the legs to alter the tilt from front-to-back or sideto side. If the refrigerator seems unsteady or the doors do not close easily, adjust the refrigerator's tilt, using the instructions below: 1 Turn the leveling leg to the left to raise that side of the refrigerator or to the right to lower it. It may take several turns of the leveling leg to adjust the tilt of the refrigerator. NOTE • A flare nut wrench works best, but an open-end wrench will suffice. Do not over-tighten.