LG LRTNC0705V Owners Manual - Page 13

ENGLISH OPERATION OPERATION 13 Before Use Checklist Clean the refrigerator. Clean the refrigerator thoroughly and wipe off all dust accumulated during shipping. CAUTION • Do not scratch the refrigerator with a sharp object or use a detergent that contains alcohol, a flammable liquid, or an abrasive when removing any tape or adhesive from the refrigerator. Remove adhesive residue by wiping it off with your thumb or dish detergent. • Do not peel off the model or serial number label or the technical information on the rear surface of the refrigerator. Open refrigerator doors and freezer drawers to ventilate the interior. The inside of the refrigerator may smell like plastic at first. Remove any adhesive tape from inside the refrigerator, and open the refrigerator doors and the freezer drawers for ventilation. Connect the power supply. Check if the power supply is connected before use. Wait for the refrigerator to cool. Allow the refrigerator to run for at least two to three hours before putting food in it. Check the flow of cold air in the freezer compartment to ensure proper cooling. CAUTION • Putting food in the refrigerator before it has cooled could cause the food to spoil or a bad odor to remain inside the refrigerator. The refrigerator makes a loud noise after initial operation. This is normal. The volume will decrease as the temperature decreases.