LG LRTNC0705V Owners Manual - Page 14
Control Panel
View all LG LRTNC0705V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
14 OPERATION Control Panel Depending on the model, some of the following functions may not be available. The actual control panel may differ from model to model. Temperature Controller Controller for Refrigerator Compartment For colder temperatures, adjust the control knob to Coldest, and for warmer temperatures, adjust the control knob to Cold. Controller for Freezer Compartment † This feature is only available on some models. Type A† Type B† Type C† Type D† NOTE • Wait until 2 or 3 hours have passed after connecting the appliance to the outlet before storing food in the appliance. If operation is interrupted, wait 5 minutes before restarting. • The internal temperatures could be affected by the location of the appliance, the ambient temperature, the frequency of door opening and so on. • The default setting of the temperature control knob for the refrigerator compartment is 4. • The default setting of the temperature control dial for the freezer compartment is 3 for type A & C and 2 for type B & D. • Setting the freezer controller to a higher number lowers the temperature of the freezer compartment. • Because the amount of cooled air supplied does not change, the refrigerator compartment will be warmer if the freezer compartment becomes colder. • When the freezer compartment is not cold enough in summer, adjust the control in the freezer to High (4~5) for type A & B or (3~4) for type C & D. • Setting the freezer dial at (4~5) for type A & B or (3~4) for type C & D will maintain a low temperature in the freezer, but the refrigerator will cool more slowly. In warmer climates, it may also be necessary to adjust the refrigerator compartment to a cooler temperature (6~7). • Use the freezer settings 5-7 to quick freeze items in the freezer compartment. Leave the refrigerator setting the same or set it to a warmer setting. When the quick freezing is finished, change the settings back to the recommended settings.