LG LSC23924SB Owner's Manual - Page 10

Reinstalling the rigth Refrigerator door, Reinstalling the left Freezer door

Get LG LSC23924SB PDF manuals and user guides View all LG LSC23924SB manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

REFRIGERATOR INSTALLATION Reinstalling the rigth (Refrigerator) door (1) (2) (3) (4) (5) (3) Rivet Type 1 (4) (5) Type 2 4. Hook tab on door switch side of cover (2) under edge of wire opening in cabinet top. Position cover into place. Insert and tighten cover screw (1). 5. Reconnect the water tubes by inserting the tubes into the connectors. Collet Tube Insert Line 1. Place the door onto the lower hinge pin. 2. Fit top hinge (4) over hinge lever latch (5) into place. Rotate lever (3) counterclockwise to secure hinge. NOTE: Regardless the type of hinge lever (3); type1: without rivet or type 2: with rivet the removal process is the same. 3. Hook tab on switch side of corner under edge of wire opening in cabinet top. Position cover (2) into place. Insert and tighten cover screw (1). Reinstalling the left (Freezer) door (2) (1) (4) (5) (6) (7) Type 1 (3) (7) (5) (6) Rivet Type 2 1. Feed the water tubes through the lower hinge pin and place the door onto the lower hinge pin. 2. Fit top hinge (6) over hinge lever latch (7) and into place. Rotate lever (5) clockwise to secure hinge NOTE: Regardless the type of hinge lever (5); type1: without rivet or type 2: with rivet the removal process is the same. 3. Install the grounding screw (4) and connect all the wire harnesses (3). 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
REFRIGERATOR INSTALLATION
10
Reinstalling the rigth (Refrigerator) door
2. Fit top hinge (4) over hinge lever latch (5) into place.
3.
1. Place the door onto the lower hinge pin.
2. Fit top hinge (6) over hinge lever latch (7) and into
3. Install the grounding screw (4) and connect all the
4. Hook tab on door switch side of cover (2) under edge
1. Feed the water tubes through the lower hinge pin and
place the door onto the lower hinge pin.
Reinstalling the left (Freezer) door
5. Reconnect the water tubes by inserting the tubes into
NOTE
: Regardless the type of hinge lever (5);
type1: without rivet or type 2: with rivet the
removal process is the same.
NOTE
: Regardless the type of hinge lever (3);
type1: without rivet or type 2: with rivet the
removal process is the same.
Hook tab on switch side of corner under edge of wire
(5)
Rotate lever (3) counterclockwise to secure hinge.
opening in cabinet top. Position cover (2) into place.
Insert and tighten cover screw (1).
place. Rotate lever (5) clockwise to secure hinge
wire harnesses (3).
of wire opening in cabinet top. Position cover into
place. Insert and tighten cover screw (1).
(1
(6)
the connectors.
)
(4)
(2
)
(7)
Type 1
(1)
Type 1
(3)
(3)
(4)
(5)
(5)
(6)
Type 2
Rivet
(4
(2)
)
(5
)
Type 2
(3
(7)
)
Rivet
Insert Line
Tube
Collet