LG LSC23924SB Owner's Manual - Page 11

REFRIGERATOR INSTALLATION DOOR ALIGNMENT Remove the base grille before adjusting the doors. See BASE GRILLE INSTALLATION for reference. Two methods of door alignment are available based on the amount of adjustment needed and installation requirements. Type 1 Adjusting tool: Flat blade screwdriver If the freezer compartment door is lower than the refrigerator compartment door, level them by inserting a flat blade screwdriver into the groove of the left leveling leg and rotating it clockwise. Type 2 Adjusting tools: 5/16" (8 mm) wrench and ¾" (19 mm) wrench Height difference Keeper nut Height Adjustment difference hinge pin Down 9 Wrench Up Height difference Left leveling leg Height difference If the freezer compartment door is higher than the refrigerator compartment door, level them by inserting a flat blade screwdriver into the groove of the right leveling leg and rotating it clockwise. Height difference Using a ¾" (19 mm) wrench, turn the keeper nut clockwise to lossen the keeper nut. Using a 5/16" (8 mm) wrench, turn the adjustment hinge pin clockwise or counterclockwise to level the refrigerator and freezer door. After leveling the door, turn the keeper nut counterclockwise to tighten. CAUTION: Do not overtight the door adjustment screw. The hinge pin can be pulled out. (Adjustable range of height is a maximum of ½" (1.27 cm)). AFTER LEVELING THE DOOR HEIGHT Confirm all legs are in contact with the floor. Height difference 9 Right leveling leg 11