LG LSC23924SW Owner's Manual - Page 24
Dispense 2.5 gallons 9.46 L
View all LG LSC23924SW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
USING YOUR REFRIGERATOR Installing the water filter Remove red cap from the filter and insert the two tabs on the filter tip into the two slots in the refrigerator filter receptacle. You should feel the filter entering completely. Turn the filter clockwise to lock it into place. The Lock symbol will be lined up with the indicator arrow. After installing water filter: 1. Replace the shelf to the initial position. 2. After installing filter, turn on household water supply. 3. Dispense 2.5 gallons (9.46 L) of water to purge the system, depressing and releasing the dispenser button in cycles of 30 seconds ON and 60 seconds OFF. Open the refrigerator door and check the shelf area for leaks. To purchase or replace water filters (some models does not include this piece in the refrigerator), call your Service center. Refer to the Warranty Card to obtain the telephone number of the Service center near you and ask for part no. ADQ72910901. 24