LG LSC27921SW Owner's Manual - Page 11
Plug In The Refrigerator, Start The Icemaker
View all LG LSC27921SW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
REFRIGERATOR INSTALLATION Back of refrigerator Tubing Clamp ¼" (6,35 mm) Tubing ¼" (6,35 mm) Compression Nut Ferrule (sleeve) Figure 1 Refrigerator Connection Fasten the tubing into the tubing clamp attached to the back of the refrigerator. First, loosen the screw fastening the clamp. Next, insert the tubing in the groove. Finally, re-fasten the screw. 10. PLUG IN THE REFRIGERATOR Arrange the coil of tubing so that it does not vibrate against the back of the refrigerator or against the wall. Push the refrigerator back to the wall. 11. START THE ICEMAKER Set the icemaker power switch to the ON (I) position. The icemaker will not begin to operate until it reaches its operating temperature of 15°F (-9°C) or below. It will then begin operation automatically if the icemaker power switch is in the ON (I) position. 12