LG LSC27935SB Owner's Manual - Page 14

USING YOUR REFRIGERATOR ENSURING PROPER AIR CIRCULATION In order to ensure proper temperatures, air MUST flow between the refrigerator and freezer sections. freezer compartment to ensure proper cooling. Your refrigerator is now ready for use. • Cool air enters the freezer through the vents located at the top of the compartment and exits through the vents located behind the freezer drawers. • Cool air from the freezer section enters the fresh food section through vents located at the top of the compartment. The air moves down throughout the compartment and exits through the vents located behind the crisper drawers. CONTROL PANEL FEATURES Press the button for the desire function to review and select other settings. ICE TYPE CRUSH CUBE LED DISPLAY The LED display shows the temperature settings, dispenser options, and the water filter door alarm and status messages. ICE PLUS HOLD 3 SECS MONTH ICE TYPE ICE TYPE ICE TYPE The ICE TYPE is used to select cube, ice or crushed ice. NOTE: Hold the glass or other container in place for a couple of seconds after dispensing ice or water to catch the last few cubes or drops. The dispenser is designed not operate while either refrigerator door is open. • Do not block any of these vents with food packages. If the vents are blocked, airflow will be interrupted and temperature and moisture problems may occur. IMPORTANT: Because air circulates between both sections, any odors formed in one section will transfer to the other. You MUST thoroughly clean both sections to eliminate odors. To prevent odor transfer and dried out food, wrap or cover foods tightly. (See the "Food Storage Guide" section for details). FREEZER REFRIGERATOR ICE PLUS LIGHT/FILTER ALARM/LOCK 3 SEC FREEZER FREEZER Press the FREEZER button to adjust the temperature in the freezer compartment. REFRIGERATOR REFRIGERATOR Press the REFRIGERATOR button to adjust the temperature in the refrigerator compartment. NOTE: The actual inner temperature varies depending on the food status, since the indicated temperature setting is the target temperature an not the actual temperature within the refrigerator. NOTE: If you close the refrigerator door, you may see the freezer door open and close again due to pressure from internal air flow. Initially set the REFRIGERATOR CONTROL at 37 °F (3°C). Leave it at these settings for 24 hours (one day) to stabilize. Then adjust the compartment temperature as illustrates above. NOTE: When press simultaneously the FREEZER button and the REFRIGERATOR button for more than 5 seconds, the temperature display will change from Fahrenheit to Celsius or vice versa. PRIOR TO USE 1. Clean your refrigerator thoroughly and wipe off dust accumulated during shipping. 2.Install accessories such as ice cube bin, drawers, shelves, etc., in their proper places. They are packed together to prevent possible damage during shipment. 3. Let your refrigerator run for at least 2 or 3 hours before putting food in it. Check the flow of cold air in the ICE PLUS ICE PLUS Press this button once to activate the increased ice making function. The ICE PLUS icon on the display panel will illuminate when activated. The Ice Plus function runs the freezer compartment at the coldest settings for a 24 hours period to increase ice making. Press the button again to cancel the Ice Plus function. 13