LG LSCI307ST Owner's Manual - Page 28
Before Calling For Service
View all LG LSCI307ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
TROUBLESHOOTING BEFORE CALLING FOR SERVICE Problem appears in the timer display Possible Causes • C ontrol pad was touched too long. Solutions • This message will appear if any pad except the Timer or pads is touched for more than 10 seconds It will also appear if liquids or objects are spilled or left on the controls area. To clear the error code, remove any liquid or objects from the controls area and press the POWER pad to reset the cooktop. appears in the timer display • S upplied voltage to cooktop is too low. • If the voltage of the power supplied to the cooktop is too low, it cannot operate properly and will show this error code. This may be caused by reduced voltage being supplied to the house circuit. If connections are correct and the supplied voltage returns to normal, the code will disappear. appears in the display and a number appears in the timer display • Electronics fault error message. • Turn the cooktop OFF; then shut off power at the fuse or circuit breaker for about 30 seconds. Turn power back on to the cooktop and turn the cooktop on using the POWER pad. If the error message is still displayed, call for service. flashes in the display • Power outage or initial startup. • When the cooktop is first turned on or after a power outage, will blink in the display for 90 minutes or until the POWER pad is touched for 2 seconds. 28