LG LST3510A Owners Manual - Page 16

Connections (Continued) HD Monitor DVI-HDTV Connections Antenna Cable TV Wall Jack Panel OR HD Ready TV Connection Panel ANTENNA INPUT S-VIDEO INPUT AUDIO INPUT VIDEO INPUT L R DVI-HDTV INPUT DVD/HDTV Receiver Connection Panel 11 Connect the "Antenna/Cable" to the "ANT IN" jack on the DVD/HDTV Receiver using a coaxial RF cable. ote There might be some areas where the signal strength could be too high. If so, you may need to connect the antenna to an optional attenuator. Screw the attenuator onto the "ANT IN" jack. (Refer to page 12.) 2 Connect the "ANT LOOP OUT" jack on the DVD/HDTV Receiver to the "Antenna In" jack on your TV using a coaxial RF cable. 3 Connect the "DVI-HDTV OUT" jack on the DVD/HDTV Receiver to the "DVI IN" jack of your TV using DVI-type connector. (The Output Selection must be set to DVI, refer to Setting the Display Format on page 19) 4 Connect the L/R "AUDIO OUT" jacks on the DVD/HDTV Receiver to the L/R "AUDIO IN" jacks on your TV using RCA-type cables. ote • DVI-HDTV OUT is useable if 1080i, 720p, or 480p display format is selected. • A DVI-HDTV input is one that is compliant with EIA-861 and HDCP specifications. Check your TV or monitor's user manual to find out if the TV or monitor's DVI input is compliant with these specifications. • Some HD Monitors designed for PC applications using DVI-D may not work with this connection. 16