LG LSXC22396S Owners Manual - Page 42
WARNING, CAUTION, Application Guidelines/Water Supply
View all LG LSXC22396S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
42 MAINTENANCE Application Guidelines/Water Supply Parameters Service Flow 0.5 gpm (1.9 lpm) Water Supply Community or Private Well Potable Water Water Pressure 20 - 120 psi (138 - 827 kPa) Water Temperature 33 °F - 100 °F (0.6 °C - 37.8 °C) Capacity 200 gallons (757 liters) It is essential that the manufacturer's recommended requirements be carried out for the product to perform as advertised. NOTE • While the testing was performed under standard laboratory conditions, actual performance may vary. Replacement Cartridge: ADQ74793501(LT1000P) NSF System Trade Name Code: MDJ64844601 lg.com website. For further assistance, the LG Electronics Customer Information Center is open 24 hours a day/7 days a week. USA: 1-800-243-0000 Canada: 1-888-542-2623 LG is a trademark of LG corp. NSF is a trademark of NSF International. Manufactured for LG® Electronics by: LG Electronics, INC 170, Sungsanpaechoungro, Seongsan-gu, Gyeongsangnam-do, THE REPUBLIC OF KOERA WARNING To reduce the risk associated with choking: • Do not allow children under 3 years of age to have access to small parts during the installation of this product. To reduce the risk associated with the ingestion of contaminants: • Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems cysts. EPA Establishment # 070595-MEX-001 CAUTION To reduce the risk associated with property damage due to water leakage: • Read and follow Use Instructions before installation and use of this system. • Installation and use MUST comply with all state and local plumbing codes. • Do not install if water pressure exceeds 120 psi (827 kPa). If your water pressure exceeds 80 psi, you must install a pressure limiting valve. Contact a plumbing uncertain how to check your water pressure. • Do not install where water hammer conditions may occur. If water hammer conditions exist you must install a water hammer arrester. Contact a plumbing professional if you are uncertain how to check for this condition. • Do not install on hot water supply lines. The maximum operating water temperature of this • temperatures drop below 40 °F (4.4 °C). • be replaced every 6 months, at the rated capacity or if a • when temperatures are expected to drop below 33° F. • Do not install systems in areas where ambient temperatures may go above 110° F (43.3° C). • on a water system, a device for controlling pressure due to thermal expansion must be installed. • of leaks.