LG LSXS22423S Owners Manual - Page 20

ENGLISH 20 HOW TO USE HOW TO USE Before Use Clean the refrigerator. Clean your refrigerator thoroughly and wipe off all dust that accumulated during shipping. CAUTION  Do not scratch the refrigerator with a sharp object or use a detergent that contains alcohol, a flammable liquid or an abrasive when removing any tape or adhesive from the refrigerator,.  Do not peel off the model or serial number label or the technical information on the rear surface of the refrigerator. NOTE Remove adhesive residue by wiping it off with your thumb or dish detergent. Connect the power supply. Check if the power supply is connected before use. Read the "Turning On The Power" section. OFF Turn off the icemaker if the refrigerator is not yet connected to the water supply. Turn off the automatic icemaker and then plug the power plug of the refrigerator into the grounded electric outlet. * This is applicable only to certain models. CAUTION Running the automatic icemaker before connecting it to the water supply may cause the refrigerator to malfunction. Wait for the refrigerator to cool. Allow your refrigerator to run for at least two to three hours before putting food in it. Check the flow of cold air in the freezer compartment to ensure proper cooling. CAUTION Putting food in the refrigerator before it has cooled could cause the food to spoil, or a bad odor could linger inside the refrigerator. The refrigerator makes a loud noise after initial operation. This is normal. The volume will decrease as the temperature lowers. Open refrigerator and freezer doors to ventilate the interior. The inside of the refrigerator may smell like plastic at first. Remove any adhesive tape from inside the refrigerator and open the refrigerator and freezer doors for ventilation.