LG LSXS22423S Owners Manual - Page 48

Problem, Possible Causes, Solutions, WARNING

Get LG LSXS22423S PDF manuals and user guides View all LG LSXS22423S manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

48 TROUBLESHOOTING ENGLISH Ice & Water Problem Water is not dispensing. Possible Causes Solutions New installation or water line Dispense 2.5 gallons of water (flush for recently connected. approximately 5 minutes) to remove trapped air and contaminants from the system. Do not dispense the entire 2.5 gallon amount continuously. Depress and release the dispenser pad for cycles of 30 seconds ON and 60 seconds OFF. The dispenser panel is locked. Press and hold the Lock button for three seconds to unlock the control panel and dispenser. The dispenser is not set for water The dispenser can be set for ice or water. dispensing. Make certain that the control panel is set for the proper operation. Press the Water button on the control panel to dispense water. Refrigerator or freezer doors are not Water will not dispense if any of the closed properly. refrigerator doors are left open. Dispensing warm water. Water filter has been recently After the water filter is replaced, dispense removed or replaced. 2.5 gallons of water (flush for approximately 5 minutes) to remove trapped air and contaminants from the system. Do not dispense the entire 2.5 gallon amount continuously. Depress and release the dispenser pad for cycles of 30 seconds ON and 60 seconds OFF. Tubing connecting refrigerator to The tubing can kink when the refrigerator house supply valve is kinked. is moved during installation or cleaning resulting in reduced water flow. Straighten or repair the water supply line and arrange it to prevent future kinks. The house water supply is not Connect the refrigerator to the water supply connected, the valve is not turned on and turn the water shutoff valve fully open. fully, or the valve is clogged. If the problem persists, it may be necessary to contact a plumber. Refrigerator was recently installed. Allow 24 hours after installation for the water storage tank to cool completely. The water dispenser has been used Depending on your specific model, the recently and the storage tank was water storage capacity will range from exhausted. approximately 20 to 30 oz. Dispenser has not been used for If the dispenser has not been used for several hours. several hours, the first glass dispensed may be warm. Discard the first 10 oz. Refrigerator is connected to the hot Make sure that the refrigerator is connected water supply. to a cold water pipe. WARNING: Connecting the refrigerator to a hot water line may damage the icemaker.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
48
TROUBLESHOOTING
ENGLISH
Ice & Water
Problem
Possible Causes
Solutions
Water is not
dispensing.
New installation or water line
recently connected.
Dispense 2.5 gallons of water (flush for
approximately 5 minutes) to remove trapped
air and contaminants from the system. Do
not dispense the entire 2.5 gallon amount
continuously. Depress and release the
dispenser pad for cycles of 30 seconds ON
and 60 seconds OFF.
The dispenser panel is locked.
Press and hold the Lock button for three
seconds to unlock the control panel and
dispenser.
The dispenser is not set for water
dispensing.
The dispenser can be set for ice or water.
Make certain that the control panel is set for
the proper operation. Press the Water button
on the control panel to dispense water.
Refrigerator or freezer doors are not
closed properly.
Water will not dispense if any of the
refrigerator doors are left open.
Water filter has been recently
removed or replaced.
After the water filter is replaced, dispense
2.5 gallons of water (flush for approximately
5 minutes) to remove trapped air and
contaminants from the system. Do not
dispense the entire 2.5 gallon amount
continuously. Depress and release the
dispenser pad for cycles of 30 seconds ON
and 60 seconds OFF.
Tubing connecting refrigerator to
house supply valve is kinked.
The tubing can kink when the refrigerator
is moved during installation or cleaning
resulting in reduced water flow. Straighten
or repair the water supply line and arrange it
to prevent future kinks.
The house water supply is not
connected, the valve is not turned on
fully, or the valve is clogged.
Connect the refrigerator to the water supply
and turn the water shutoff valve fully open.
If the problem persists, it may be necessary
to contact a plumber.
Dispensing
warm water.
Refrigerator was recently installed.
Allow 24 hours after installation for the
water storage tank to cool completely.
The water dispenser has been used
recently and the storage tank was
exhausted.
Depending on your specific model, the
water storage capacity will range from
approximately 20 to 30 oz.
Dispenser has not been used for
several hours.
If the dispenser has not been used for
several hours, the first glass dispensed may
be warm. Discard the first 10 oz.
Refrigerator is connected to the hot
water supply.
Make sure that the refrigerator is connected
to a cold water pipe.
WARNING:
Connecting the refrigerator to a
hot water line may damage the icemaker.