LG LTCS20020S Owners Manual - Page 12
Reattaching The Doors
View all LG LTCS20020S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
REFRIGERATOR INSTALLATION Door Closer/ Stop Hinge Pin Bracket Hinge Pin Insert Flip the Middle Hinge Bracket, (flange will now be on top) position it on left side of the refrigerator and reattach with two bolts and a Phillips screwdriver. Place the refrigerator door down over the pin on the bottom hinge. Place the washer between the refrigerator door and middle hinge and re-attach Hinge Pin to Hinge Bracket with a ¼" socket wrench. NOTE: Bracket has been flipped, but Hinge Pin stays in the same orientation with its hexagonal end facing upward. Reverse the Door Closer/Stop by flipping it over. Place it on top of the Hinge Pin Insert Bracket, and tighten both down with the screw. Tighten the Hinge Pin Bracket to the door. NOTE:The Door Closer Stop is only presented on some models. Flange Hinge Pin Bracket Door Closer/ Stop Middle Hinge Bracket Insert the Decorative Screw into the outer hole on the right side of the housing. Attach cover on the right side. Cover is force-fitted. Hinge Pin Insert With a flat-head screwdriver, carefully pry off and remove the cover over the screw holes on the left side of refrigerator housing. Decorative Screw REATTACHING THE DOORS Place the freezer door down over the Hinge Pin on the Middle Hinge Pin Bracket. Remove the outer lower Decorative Screw from the housing at the area between the freezer and refrigerator doors. (You will need this hole for the Middle Hinge Bracket.) Place the Upper Hinge Pin on top of the freezer door and line up the Upper Hinge with holes on top of the refrigerator. Use the three bolts to replace the Hinge. 10