LG LTCS20020S Owners Manual - Page 8

REFRIGERATOR INSTALLATION HOW TO REMOVE AND INSTALL THE REFRIGERATOR DOORS (For additional support on this topic, including helpful videos, please visit us at: www.lg.com). If entrance is lees than 35 inches wide, the refrigerator's door will need to be removed. IMPORTANT: Before starting, turn off and unplug the refrigerator. Remove all food and the racks from the doors. TOOLS YOU MIGHT NEED OR USE 1/4 in 3/8 in 10 mm Hex Socket Wrench Phillips Screwdriver No. 2 Flat Head Screwdriver Adjustable Wrench WARNING ELECTRICAL SHOCK HAZARD Before you begin, either unplug the refrigerator or turn off the power at the circuit breaker or fuse box. Remove food and any door rack from the refrigerator. Failure to do so could result in death or serious injury. Fig. 3 Middle Hinge Bracket 1. Removing Freezer Door Hinge Pin Gently pry off the Top Hinge Cover with a flat head screwdriver and remove it. See Fig. 1. Fig. 1 2. Removing Refrigerator Door Loose and remove the two bolts and the screw to remove the middle hinge bracket from refrigerator housing (Figure 4). Set parts aside (Figure 5). Fig. 4 Middle Hinge Bracket Using 10 mm or 3/8 inch socket wrench, remove the three bolts and lift the Top Hinge (See Fig. 2). Set parts aside. Fig. 2 Fig. 5 Lift freezer door slightly and remove it (See Fig. 3) Set parts aside. Lift up door slightly and remove it (See Figure 6). 6