LG LUV300B Owner's Manual - Page 17

Warning - filter

Page 17 highlights

CARE & CLEANING Emptying the Dust Tank WARNING Electrical shock and personal injury hazard. Always unplug power cord from electrical outlet before performing any service on vacuum cleaner. Failure to do so could result in electrical shock or personal injury from vacuum cleaner suddenly starting. Cleaning the Dust Tank For optimal performance, check filters regularly and clean when necessary. To Clean the Dust Tank: 1. R emove the dust tank from the vacuum cleaner. 2. P ress the Emptying dirt release and open the bottom plate. 3. W ipe out the dust tank with a soft cloth or paper towel. For maximum performance, always empty the dust tank when the dirt level reaches the MAX line. TO REMOVE DUST TANK, press the dust tank release, tilt the dust tank back, then lift it out of the vacuum cleaner. 4. R elease the latch on the Side door on both the right and left sides. TO EMPTY DUST TANK, press the Emptying dirt release and open the bottom plate, as shown. 5. R emove any hair, fibers or other debris from the dust separator. Do not remove the cones attached to the side door for cleaning. NEVER operate the vacuum cleaner with wet filters or components! TO REINSTALL THE DUST TANK, place it in the holder, then tilt forward until it clicks into place. Make sure the dust tank is properly seated! Don't touch the inner gear and button. 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69

16
CARE & CLEANING
Emptying the Dust Tank
For maximum performance, always empty the dust
tank when the dirt level reaches the MAX line.
TO REMOVE DUST TANK,
press the dust tank
release, tilt the dust tank back, then lift it out of the
vacuum cleaner.
TO EMPTY DUST TANK,
press the Emptying dirt
release and open the bottom plate, as shown.
TO REINSTALL THE DUST TANK,
place it in the
holder, then tilt forward until it clicks into place.
Make sure the dust tank is properly seated!
Don’t touch the inner gear and button.
Cleaning the Dust Tank
For optimal performance, check filters regularly and
clean when necessary.
To Clean the Dust Tank:
1.
Remove the dust tank from the vacuum cleaner.
2. Press the Emptying dirt release and open the
bottom plate.
3. Wipe out the dust tank with a soft cloth or paper
towel.
4. Release the latch on the Side door on both the
right and left sides.
5. Remove any hair, fibers or other debris from the
dust separator.
Do not remove the cones attached to the side
door for cleaning.
NEVER operate the vacuum cleaner with wet
filters or components!
Electrical shock and personal injury hazard.
Always unplug power cord from electrical
outlet before performing any service on
vacuum cleaner. Failure to do so could result
in electrical shock or personal injury from
vacuum cleaner suddenly starting.
WARNING