LG LUV300B Owner's Manual - Page 20
Removing Clogs - belt
UPC - 048231316934
View all LG LUV300B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
ENGLISH CARE & CLEANING 5. Fit the agitator through the belt, making sure the belt is aligned with the pulley section of the agitator. Removing Clogs WARNING Electrical shock and personal injury hazard. Always unplug the vacuum cleaner before servicing. Failure to do so could result in electrical shock or personal injury. 6. Lower the agitator into place, making sure the oval shaped tabs fit into the indents on the head. 7. Reinstall the agitator brush cover as described above. For a replacement belt, order LG service center belt part # MAS61842501. Replacing the batteries 1. Slide the battery cover up and away from the hose. If you notice a loss in suction, first check the filters as described on pages 15. If the filters are clean, there may be a clog. The arrows show areas where clogs are most likely to occur. To check for clogs: 1. C heck the hose where it connects to the handle by pressing the two release buttons on the top end of the hose. 2. R elease the wand from the vacuum cleaner by pressing the wand release button. Separate each accessories, see page 8. and check accessories. ➀ ➁ 2. Replace the two batteries and reinstall the battery cover. NOTE : Replacing isn't done yet, use the power button on the body. 3. R emove the dust tank and check the dust tank inlet and body inlet where it connects to the vacuum cleaner body. 19