LG LX140 Owner's Manual - Page 9
CDMA Standard, Basic Air, Interface, Network, Service, Performance, Designator, Description - battery
View all LG LX140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Welcome CDMA technology uses a feature called DSSS (Direct Sequence Spread Spectrum) that enables the phone to keep communication from being crossed and to use one frequency channel by multiple users in the same specific area. This results in a 10-fold capacity increase when compared with analog mode. In addition, features such as soft / softer handoff, hard Handoff, and dynamic RF power control technologies combine to reduce call interruptions. The Cellular and PCS CDMA networks consist of MSO (Mobile Switching Office), BSC (Base Station Controller), BTS (Base Station Transmission System), and MS (Mobile Station). The following table lists some major CDMA standards. * TSB-74: Protocol between an IS-95A system and ANSI J-STD-008 1xRTT system receives twice as many subscribers in the wireless section as IS-95. Its battery life is twice as long as IS-95. High-speed data transmission is also possible. CDMA Standard Designator Basic Air Interface ANSI J-STD-008 TIA/EIA-IS2000 Network Service TIA/EIA/IS-634 TIA/EIA/IS/651 TIA/EIA/IS-41-C TIA/EIA/IS-124 TIA/EIA/IS-96-B TIA/EIA/IS-637 TIA/EIA/IS-657 IS-801 Performance TIA/EIA/IS-97 TIA/EIA/IS-98 ANSI J-STD-018 ANSI J-STD-019 TIA/EIA/IS-125 Description IS-95 adapted for PCS frequency band cdma2000 1xRTT AirInterface MAS-BS PCSC-RS Intersystem operations Non-signaling data comm. Speech CODEC Short message service Packet Data Position Determination Service (gpsOne) Cellular base station Cellular mobile station PCS personal station PCS base station Speech CODEC 8 Welcome