LG M237WD-PM Owner's Manual (English) - Page 86
Remote control, Channel Skip/Add Command: m b, Key Command: m c, Backlight Command: m g
UPC - 888939000601
View all LG M237WD-PM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
APPENDIX Data5: 7 Main/Sub Picture 6 Two/One Part Channel 5 Using Physical 4 Channel Reserved 3 2 1 0 Step 0 Main 1 Sub 0 Two 1 One 0 Use x 0 0 0 0 1 No Use x 0 0 0 1 x 0 0 1 0 NTSC Air NTSC Cable ATSC Air x 0 0 1 1 ATSC Cable_std x 0 1 0 0 ATSC Cable_hrc x 0 1 0 1 ATSC Cable_irc x 0 1 1 0 ATSC cable_auto x 0 1 1 1 x x x x x x 1 1 1 1 Reserved ... Reserved The table above lists the binary code which must be converted to Hexadecimal before sending. For example: The binary code to tune the sub source to an NTSC cable channel is "1000 0001", which translates to "81" in Hex. * 7th bit : For which source do you want to change the channel. * 6th bit: Use a two part or one part channel. Most cases just use 0 since it's ignored when using NTSC. * 5th bit: Use 0 with NTSC since it can only use the physical channel number. Normally use 1 for ATSC since most times it doesn't matter what the physical number is. * 4th bit: Set to 0. * 3-0 bits: Choose signal type. * Tune Command Examples: 1. Tune to the analog (NTSC) cable channel 35. Data 00 = Physical of 35 = 23 Data 01 & 02 = No Major = 00 00 Data 03 & 04 = No Minor = 00 00 Data 05 = 0000 0001 in binary = 01 Total = ma 00 23 00 00 00 00 01 2. Tune to the digital (ATSC) local channel 30-3. Data 00 = Don't know Physical = 00 Data 01 & 02 = Major is 30 = 00 1E Data 03 & 04 = Minor is 3 = 00 03 Data 05 = 0010 0010 in binary = 22 Total = ma 00 00 00 1E 00 03 22 Acknowledgement[a][ ][Set ID][ ][OK][Data00][Data01] [Data02][Data03][Data04][x][a][ ][Set ID] [ ][NG][Data00][x] 20. Channel Skip/Add (Command: m b) To add and delete the channels. Transmission [m][b][ ][Set ID][ ][Data][Cr] Data 00: Channel Delete Data 01: Channel Add Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x] 21. Key (Command: m c) To send IR remote key code. Transmission [m][c][ ][Set ID][ ][Data][Cr] Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x] Code (Hexa) Remote control Code (Hexa) Remote control 0F 0B 08 79 10-19 4C 09 02 03 00 01 1E 39 TV/PC 40 INPUT 41 POWER 07 RATIO 06 Number Key 0-9 44 - (Dash) 43 MUTE 45 VOL + 52 VOL - 4D CH + 5B CH - 0A FAV 1A CC ENTER MENU Q.MENU SOUND PICTURE RETURN SAP FLASHBK 22. Backlight (Command: m g) To adjust screen backlight. Transmission [m][g][ ][Set ID][ ][Data][Cr] Data Min:00 ~ Max:64 (*transmit by Hexadecimal code) *Refer to 'Real data mapping'. See page 84. Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x] 85