LG M3800S-BN User Guide - Page 26

RS-232C Controlling the Multiple Product Transmission / Receiving Protocol Transmission [Command1][Set ID][Command2][Data][Cr] * [Command 1]: First command. (j) * [Command 2]: Second command. * [Set ID]: Set up the Set ID number of product. range : 00~99. by setting '0', server can control all products. * In case of operating with more than 2 sets using set ID as '0' at the same time, it should not be checked the ack message. Because all sets will send the ack message, so it's impossible the check the whole ack messages. * [DATA]: To transmit command data. * [Cr]: Carriage Return ASCII code '0x0D' OK Acknowledgement [OK] * The Product transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer. Error Acknowledgement [NG] * If there is error, it returns NG. A3