LG R975GM Owners Manual - Page 13
Turning on the Standby Power Supply, Automatic Charging, Manual Charging, Moving the Robot Cleaner
View all LG R975GM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
ENGLISH Turning on the Standby Power Supply Press and hold the Start/Stop button a for 3 seconds or press the Power button b on the remote control. •• To turn off the standby power supply, press the Start/Stop button a or press the Power button b on the remote control again. BEFORE USING THE ROBOT CLEANER 13 •• To resume cleaning while the robot cleaner is charging, press the Start/Stop button on the control panel or the remote control. Manual Charging Moving the Robot Cleaner Charge the battery manually if using the robot cleaner for the first time after purchasing or if the battery is completely discharged. 1 Insert the power plug of the home station into a power outlet. NOTE •• Turning off the standby power supply disconnects the robot cleaner from the LG ThinQ application. •• In the following situations, the robot cleaner automatically turns off the standby power supply after 10 minutes: −−When the robot cleaner is unable to come out of a complicated space such as the space below the dining table while cleaning. −−When the wheels of the robot cleaner spin with no traction or the robot cleaner is caught on an obstacle and is unable to escape it. −−When the robot cleaner is standing by in a place other than the home station. 2 Turn on the main power switch. ••Charging occurs even if the main power switch is off. 3 Place the robot cleaner onto the charging terminals a by aligning it to the front side of the home station. ••When charging begins, the battery charging indicator b turns on. Automatic Charging The robot cleaner automatically returns to the home station at the end of a cleaning cycle or when its battery is running low. NOTE •• If the robot cleaner returns to the home station to recharge during a cleaning cycle, the cleaning mode icon flashes. After recharging, the robot cleaner continues the cleaning cycle. •• If the cleaning mode has been changed while charging, the robot cleaner will not resume cleaning. •• If the robot cleaner is connected to the LG ThinQ application and finishes charging between 9 PM and 6 AM, it will not resume cleaning. This cannot be changed. Using the Home Button To return the robot cleaner to the home station, press the Home button on the robot cleaner or on the remote control. The robot cleaner moves to the home station to start charging. •• If the robot cleaner does not move to the home station to charge, it can be manually placed onto the home station.