LG R975GM Owners Manual - Page 23

ENGLISH Using Smart Diagnosis Using the Robot Cleaner to Diagnose Issues You can diagnose the current status of the robot cleaner automatically using the Smart Diagnosis function. •• If you experience problems with the robot cleaner, run the Smart Diagnosis function and use the results to help solve them. 1 Turn on the main power switch a of the robot cleaner and dock the robot cleaner in the home station. ••The Smart Diagnosis function is only available while the robot cleaner is charging. 2 Remove items within 3 1/4 ft (1 m) of the home station that are in the way of the robot cleaner. ••During the Smart Diagnosis, the robot cleaner moves around within an area approximately 20 inches (50 cm) in diameter. SMART FUNCTIONS 23 4 The robot cleaner announces the result through a voice message. ••To repeat the voice message, press the Home button. 5 Press the Start/Stop button to terminate the diagnosing process. ••After the Smart Diagnosis voice message, the robot cleaner will begin recharging after 1 minute. ••If an error is detected with any of the obstacle detection sensors during Smart Diagnosis, a voice message will announce, and the robot cleaner will not return to the home station. ••If there is a problem while Smart Diagnosis is running, the robot cleaner will provide the diagnosis result from the home station and the Smart Diagnosis will end. 3 Press the Diagnosis button b on the remote control and the process starts with a voice message. ••The robot cleaner returns back to the home station when the Smart Diagnosis has finished.