LG RCS10MPA Service Manual - Page 14

Operation CAUTION Preprogrammed Times and Cook Level All preprogrammed pads arrive set at full power. To avoid fire, do not dry newspapers or clothes in microwave oven. Interrupting Operation • Open oven door to interrupt operation. Oven fan continues to operate. Close door and press START pad to resume oven operation. • Press STOP/RESET pad to interrupt operation. Display continues to show countdown time. Press START pad to resume oven operation and countdown timing. Canceling Mistakes • If oven is operating, press STOP/RESET pad once to stop oven, then again to clear display. • If oven door is open and time shows in display, close oven door and press STOP/RESET pad to clear display. Operating Preprogrammed Pads Oven has 10 ~ 20 preprogrammed number pads. Instructions are written for factory programmed ovens. Ovens that are reprogrammed can respond differently than described below. 1. Open oven door , place food in oven, and close oven door • If pad is not pressed in 30 seconds, open and close oven door again. 2. Press desired number pad. • Oven operates and time counts down. 3. Oven stops heating and oven signal sounds when heating timing elapses. Operating QTY 2X Pads 1. Press 36; : Pad. 2. Press desired number pad • Example : press 36; : +  = 18 sec. Option: Single Digit Pads Heating Times 1 10 sec. 2 20 sec. 3 30 sec. 4 45 sec. 5 1 min. 6 1:30 min. 7 2 min. 8 3 min. 9 4 min. 0 5 min. Pads 01 Option: Double Digit Heating Pads Heating Times Times 10 sec. 11 20 sec. 02 20 sec. 12 40 sec. 03 30 sec. 13 1 min. 04 45 sec. 14 1:30 min. 05 1 min. 15 2 min. 06 1:30 min. 16 3 min. 07 2 min. 17 4 min. 08 3 min. 18 6 min. 09 4 min. 19 8 min. 10 5 min. 20 10 min. Manual Time Entry Manual Time Entry feature allows the operator to enter time and power levels, and heat without changing the preprogrammed pads. 1. Open oven door, place food in oven, and close door. • Display shows "READY". • If pad is not pressed in 30 seconds, open and close oven door again. 2. Press TIME ENTRY pad. • Display shows "00:00". 3. Press number pads to enter desired cooking time. • For example, to heat for 2 minutes 30 seconds, press 2, 3, and 0 pads. 4. Press desired power level pad to change power level. • If a power level pad is not pressed, oven defaults to 100% power. • For example, pressing MEDIUM 50% pad sets oven to 50% power. • Display shows current power level if other than 100 percent power. 5. Press START pad. • Oven operates and time counts down. 6. Oven stops heating and oven signal sounds when heating timing elapses. 4-8