LG S5100 User Manual - Page 164
Electronically Controlled Cameras
View all LG S5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
Troubleshooting Problem Cause/Solution A • If camera clock has not been set, "Date not set" 18, indicator blinks with shooting and movie recording. 123 Images and movies saved before clock is set are Date and time of dated "00/00/0000 00:00" or "01/01/2010 00:00" recording are not correct. respectively. Set the correct time and date from the Date option in the setup menu. • Check camera clock regularly against more accurate 123 timepieces and reset as required. No indicators displayed Hide info is selected for Photo info. in monitor. Select Show info. 126 Date imprint not available. Camera clock has not been set. 18, 123 Date not imprinted on • The current shooting mode is one that does not images even when Date support Date imprint. 128 imprint is enabled. • The date cannot be imprinted on movies. Screen for setting date and time is displayed when camera is turned on. Clock battery is exhausted; all settings were restored to 18, their default values. 124 Camera settings reset. Monitor turns off, and the power-on lamp blinks rapidly. Battery temperature is high. Turn off camera and allow battery to cool down before resuming use. After the lamp blinks for three minutes, the camera will turn off 17 automatically. Pressing the power switch also turns off the camera. Electronically Controlled Cameras In extremely rare instances, unusual characters may appear in the monitor and the camera may stop functioning. In most cases, this phenomenon is caused by a strong external static charge. Turn the camera off, remove and replace the battery, then turn the camera on again. In the event of continued malfunction, contact your retailer or Nikon-authorized service representative. Note that disconnecting the power source as described above may result in the loss of any data not saved to internal memory or the memory card at the time the problem occurred. Data already saved will not be affected. Technical Notes and Index 152