LG SJ2 Owners Manual - Page 20
Operating, Basic operations, USB operation, Other operations, DRC (Dynamic Range Control)
View all LG SJ2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
20 Operating Basic operations Other operations Operating USB operation DRC (Dynamic Range Control) 1. Connect the USB device to the USB port. Make the sound clear when the volume is turned 2. Select the input source to USB by pressing F repeatedly. You can see USB LED turns on. Then USB function down and prevent sudden increase of sound (Dolby Digital only). This function turns on or off when you press DRC ON/OFF. is selected. Turn off the sound temporarily To Do this Press [ (Mute) to mute your unit. Playback Press N on the remote control. To cancel it, press [ (Mute) again on the remote control or change the volume level. 3 Pause During playback, press N on the remote control. Using your TV remote control Skip to the next/ previous file During playback, press V on the remote control to go to the next file. Playing less than 2 seconds, press C on the remote control to go to the previous file. Playing after 3 seconds, press C on the remote control to go to the beginning of the file. Search for a section within a file Press and hold C/V on the remote control during playback and release it at the point you want to listen to. You can control some functions of this unit by your TV remote control even by other company's product. Controllable functions are volume up/down and mute. Press and hold DRC ON on the remote control for about 2 seconds. The standby LED blinks once. And then this functions is enabled. To turn off this function, press and hold DRC OFF about 2 seconds. The standby LED blinks once. And then this functions is disabled. ,,Note yy Supported TV brands LG Panasonic Philips Samsung Sharp Sony Toshiba Vizio Resume playback This unit memorizes a current song which is played before changing the function or turning off the unit. ,,Note yy The resume point may be cleared when you pull out the power cord or removing the USB device from the unit. yy If the USB function is not working, check the USB function is selected. yy When you pause the USB playback, USB LED on the main unit blinks. yy Make sure that the sound output of your TV is set to [External speaker]. yy Depending on the remote control, this function may not work well. yy This function does not operate on LG TV's magic remote control.