LG SJ2 Owners Manual - Page 24
BLUETOOTH connection lock (BT lock), Bluetooth, AUTO POWER ON, POWER OFF
![]() |
View all LG SJ2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Operating 24 Operating ,,Note yy When using Bluetooth technology, you have to make a connection between the unit and the Bluetooth device as close as possible and keep the distance. However it may not work well in the cases below : -- There is an obstacle between the unit and the Bluetooth device. -- There is a device using same frequency with Bluetooth technology such as a medical equipment, a microwave or a wireless LAN device. yy If Bluetooth connection does not work well, 3 try pairing it again. yy The sound may be interrupted when the connection has interference by the other electronic waves. yy Pairing is limited one Bluetooth device per one unit and multi-pairing is not supported. yy Depending on the type of the device, you may not be able to use the Bluetooth function. yy You can enjoy Bluetooth function using Smart phone, MP3, Notebook, etc.. yy The more distance between the unit and the Bluetooth device, the lower the sound quality becomes. yy Bluetooth connection will be disconnected when the unit is turned off or the Bluetooth device gets far from the unit. yy When Bluetooth connection is disconnected, connect the Bluetooth device to the unit again. ,,Note yy When the unit is not connected with Bluetooth device, Bluetooth LED will blink. yy When you connect Bluetooth device (iOS device etc.) to this unit or operate the device, the volume level can be synchronized with each other. yy You can control a Bluetooth device using C/V (Skip) and N (Play/Pause) buttons on the remote control. yy If you change to another function after connecting Bluetooth, Bluetooth connection will be disconnected. And you return to Bluetooth function, Bluetooth connection will be connected automatically. BLUETOOTH connection lock (BT lock) You can limit Bluetooth connection to only Bluetooth function to prevent unintended Bluetooth connection. Press and hold AUTO POWER ON on the remote control for about 2 seconds to turn on this function in Bluetooth function. The standby LED blinks once. And then this functions is enabled. To turn off this function, press and hold AUTO POWER OFF on the remote control for about 2 seconds in Bluetooth function. The standby LED blinks once. And then this functions is disabled. ,,Note Even if you set up Bluetooth connection lock to On, this sound bar turns on by Auto Power function. Turn off Auto Power function to prevent it. (Page 21)
![](/manual_guide/products/lg-sj2-owners-manual-8a4bb6d/24.png)