LG T730SHMK Owner's Manual - Page 5

Using the Computer, Connecting the Monitor

Page 5 highlights

Connecting the Monitor Using the Computer 1. Connect the signal cable. When mated, tighten the thumbscrews to secure the connection. 2. Connect the power cord into a properly power outlet that is easily accessible and close to the monitor. NOTE This is a simplified representation of the rear view. This rear view represents a general model; your monitor may differ from the view as shown. Power Cord Signal Cable Attached Type* Detached Type* * Wall-outlet type * PC-outlet type * Varies according to model. PC MAC Mac adapter For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector. A4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18

A4
Connecting the Monitor
Using the Computer
1.
Connect the signal cable. When mated, tighten the thumbscrews to secure the
connection.
2.
Connect the power cord into a properly power outlet that is easily accessible and
close to the monitor.
Mac adapter
For Apple Macintosh use, a separate plug adapter is needed to
change the 15 pin high density (3 row) D-sub VGA connector
on the supplied cable to a 15 pin 2 row connector.
Wall-outlet type
*
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your monitor
may differ from the view as shown.
PC-outlet type
*
PC
MAC
Power Cord
Signal Cable
Attached Type
*
Detached Type
*
*
Varies according to model.