LG U9CV1C Owners Manual - Page 25

EN Note •• To verify the Wi-Fi connection, check that the Wi-Fi f icon on the control panel is lit. •• The appliance supports 2.4 GHz Wi-Fi networks only. To check your network frequency, contact your Internet service provider or refer to your wireless router manual. •• LG ThinQ is not responsible for any network connection problems or any faults, malfunctions, or errors caused by network connection. •• If the appliance is having trouble connecting to the Wi-Fi network, it may be too far from the router. Purchase a Wi-Fi repeater (range extender) to improve the Wi-Fi signal strength. •• The Wi-Fi connection may not connect or may be interrupted because of the home network environment. •• The network connection may not work properly depending on the Internet service provider. •• The surrounding wireless environment can make the wireless network service run slowly. •• If the appliance cannot be connected due to problems with the wireless signal transmission, unplug the appliance and wait about a minute before trying it again. •• If the firewall on your wireless router is enabled, disable the firewall or add an exception to it. •• The wireless network name (SSID) should be a combination of English letters and numbers. (Do not use special characters.) •• Smartphone user interface (UI) may vary depending on the mobile operating system (OS) and the manufacturer. •• If the security protocol of the router is set to WEP, the network setup may fail. Change the security protocol (WPA2 is recommended) and connect the product again. Installing the LG ThinQ Application Search for the LG ThinQ application from the Google Play Store or Apple App Store on a smartphone. Follow instructions to download and install the application. Wireless LAN Module Specifications Wi-Fi Bluetooth Frequency Range 2412 MHz ~ 2462 MHz 2402 MHz ~ 2480 MHz Output Power (Max.) < 30 dBm < 30 dBm FCC Notice The following notice covers the transmitter module contained in this product. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and the receiver. - C onnect the equipment into an outlet on a circuit different from that to which the receiver is connected. 25