LG URETC1408N Owners Manual - Page 12
Leveling
View all LG URETC1408N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
12 INSTALLATION WARNING • To reduce the risk of electric shock, do not install the refrigerator in a wet or damp area. Flooring To avoid noise and vibration, the unit must be installed and leveled on a solidly constructed floor. If required, adjust the leveling legs to compensate for the unevenness of the floor. NOTE • Installing on carpeting, soft tile surfaces, a platform or weakly supported structure is not recommended. Ambient Temperature Install this appliance in an area where the temperature is between 50 °F (10 °C) and 95 °F (35 °C). If the temperature around the appliance is too low or high, cooling ability may be adversely affected. Dimensions and Clearances • Check the dimensions of the appliance and the installation path to ensure there is sufficient room to move the refrigerator through doors or narrow openings. • The installation location chosen for the refrigerator should allow space behind the unit for connections and airflow and space in front to open the doors and drawers. • Too small of a distance from adjacent items may result in lowered freezing capability and increased electricity consumption charges. B E A F C D G H - Dimension/Clearance A Depth B Width C Height to Top of Case D Height to Top of Hinge E Back Clearance F Depth without Door G Depth (Total with Door Open 90°) H Front Clearance URETC1408N 28 15/18" (735 mm) 27 9/16" (700 mm) 69 1/16" (1753 mm) 70 5/8" (1793 mm) 2" (50 mm) 24 15/16" (633 mm) 53 3/16" (1350 mm) 25 5/8" (727 mm) Leveling Adjusting the Leveling Leg If the appliance seems unsteady, or the doors do not close easily, adjust the appliance's tilt using the instructions below. 1 Open the bottom drawer and remove the cover from the appliance. 2 Turn the leveling leg to the left to raise that side of the appliance or to the right to lower it. It may take several turns of the leveling leg to adjust the tilt of the appliance. 3 Open the door and the drawers and check to make sure that they close easily. If they do not close easily, tilt the appliance slightly more to the rear by turning both leveling legs to the left. It may take several more turns, and be sure to turn both leveling legs the same amount. 4 When the appliance is level, open the bottom drawer and reassemble the cover.