LG URETC1408N Owners Manual - Page 38
Wi-Fi
View all LG URETC1408N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
38 TROUBLESHOOTING Problem Popping Sizzling Vibrating Dripping Pulsating or highpitched sound Possible Cause & Solution Contraction and expansion of the inside walls due to changes in temperature. • Normal Operation Water dripping on the defrost heater during a defrost cycle. • Normal Operation If the side or back of the refrigerator is touching a cabinet or wall, some of the normal vibrations may make an audible sound. • To eliminate the noise, make sure that the sides and back cannot vibrate against any wall or cabinet. Water running into the drain pan during the defrost cycle. • Normal Operation Your refrigerator is designed to run more efficiently to keep your food items at the desired temperature. The high efficiency compressor may cause your new refrigerator to run longer than your old one, but it is still more energy efficient than previous models. While the refrigerator is running, it is normal to hear a pulsating or highpitched sound. • Normal Operation Wi-Fi Problem Trouble connecting appliance and smartphone to Wi- Fi network Possible Cause & Solution The password for the Wi-Fi network was entered incorrectly. • Delete your home Wi-Fi network and begin the registration process again. Mobile data for your smartphone is turned on. • Turn off the Mobile data on your smartphone before registering the appliance. The wireless network name (SSID) is set incorrectly. • The wireless network name (SSID) should be a combination of English letters and numbers. (Do not use special characters.) The router frequency is not 2.4 GHz. • Only a 2.4 GHz router frequency is supported. Set the wireless router to 2.4 GHz and connect the appliance to the wireless router. To check the router frequency, check with your Internet service provider or the router manufacturer. The distance between the appliance and the router is too far. • If the appliance is too far from the router, the signal may be weak and the connection may not be configured correctly. Move the router closer to the appliance or purchase and install a Wi-Fi repeater.