LG URETC1408N Owners Manual - Page 16

Express Freeze, Auto Lift, Freezer Drawer, Refrigerator Drawer, Humidity, Air Filter

Page 16 highlights

16 OPERATION g Lock The lock function disables every other button on the display. • When power is initially connected to the refrigerator, the lock function is off. • To lock the control panel buttons, press and hold the Lock button until the icon appears in the display and the function is activated. • To disable the function, press and hold the Lock button for approximately three seconds. h Express Freeze This function increases the freezing capabilities. • To activate, press and hold the Express Freeze button until the LED lights up on the control panel. • The function operates for about 24 hours, then turns off automatically. • Stop the function manually by pressing and holding the button again. i Auto Lift When Auto Lift is enabled, pressing the bottom pullout drawer button automatically opens the drawer and raises the inner compartment for convenient access. Press the bottom pullout drawer button again to automatically lower the inner compartment and close the drawer. j Freezer Drawer Indicates the set temperature of the drawers in Celsius (°C) or Fahrenheit (°F). The default Freezer mode temperature is 0 °F (-18 °C). • Press the Freezer Drawer button repeatedly to select a new set temperature from - 7 °F to 5 °F (-23 °C to -15 °C). • To set the drawers to the freezer mode, press and hold the Freezer Drawer button for approximately 1 second. k Refrigerator Drawer Indicates the set temperature of the drawers in Celsius (°C) or Fahrenheit (°F). The default Refrigerator mode temperature is 37 °F (3 °C). • Press the Refrigerator Drawer button repeatedly to select a new set temperature from 33 °F to 43 °F (1 °C to 7 °C). • To set the drawers to the refrigerator mode, press and hold the Refrigerator Drawer button for approximately 1 second. NOTE • The displayed temperature is the target temperature, and not the actual temperature of the appliance. The actual temperature depends on the food inside the appliance. l Humidity Press the Humidity button to raise the humidity in all temperature zones. m Air Filter Replace the air filter when the icon turns on. After replacing the air filter, press and hold the Air Filter button for three seconds to turn the icon light off. Replace the air filter approximately every six months. NOTE Display Mode (For Store Use Only) • The Display Mode disables all cooling in the refrigerator and freezer sections to conserve energy while on display in a retail store. When activated, Demo Mode is displayed on the control panel about 5 seconds.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

16
OPERATION
g
Lock
The lock function disables every other button on the display.
When power is initially connected to the refrigerator, the lock function is off.
To lock the control panel buttons, press and hold the
Lock
button until the icon appears in the display
and the function is activated.
To disable the function, press and hold the
Lock
button for approximately three seconds.
h
Express Freeze
This function increases the freezing capabilities.
To activate, press and hold the
Express Freeze
button until the LED lights up on the control panel.
The function operates for about 24 hours, then turns off automatically.
Stop the function manually by pressing and holding the button again.
i
Auto Lift
When
Auto Lift
is enabled, pressing the bottom pullout drawer button automatically opens the drawer
and raises the inner compartment for convenient access.
Press the bottom pullout drawer button again to automatically lower the inner compartment and close
the drawer.
j
Freezer Drawer
Indicates the set temperature of the drawers in Celsius (°C) or Fahrenheit (°F). The default Freezer
mode temperature is 0 °F (-18 °C).
Press the
Freezer Drawer
button repeatedly to select a new set temperature from - 7 °F to 5 °F (-23
°C to -15 °C).
To set the drawers to the freezer mode, press and hold the
Freezer Drawer
button for approximately
1 second.
k
Refrigerator Drawer
Indicates the set temperature of the drawers in Celsius (°C) or Fahrenheit (°F). The default Refrigerator
mode temperature is 37 °F (3 °C).
Press the
Refrigerator Drawer
button repeatedly to select a new set temperature from 33 °F to 43 °F
(1 °C to 7 °C).
To set the drawers to the refrigerator mode, press and hold the
Refrigerator Drawer
button for
approximately 1 second.
NOTE
The displayed temperature is the target temperature, and not the actual temperature of the appliance.
The actual temperature depends on the food inside the appliance.
l
Humidity
Press the
Humidity
button to raise the humidity in all temperature zones.
m
Air Filter
Replace the air filter when the icon turns on. After replacing the air filter, press and hold the
Air Filter
button for three seconds to turn the icon light off. Replace the air filter approximately every six months.
NOTE
Display Mode (For Store Use Only)
The Display Mode disables all cooling in the refrigerator and freezer sections to conserve energy while
on display in a retail store. When activated, Demo Mode is displayed on the control panel about 5
seconds.