LG WM2140CW Owner's Manual - Page 11
Unpacking And Removing Shipping Bolts - won t turn on
UPC - 048231011396
View all LG WM2140CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
ENGLISH INSTALLATION INSTRUCTIONS UNPACKING AND REMOVING SHIPPING BOLTS When removing the washer from the carton base, be sure to remove the foam tub support in the middle of the carton base. If you must lay the washer down to remove the base packaging materials, always lay it carefully on its side. Do NOT lay the washer on its front or back. IMPORTANT: To prevent internal damage during transport, the washer is equipped with 4 shipping bolts and plastic retainers. These bolts and retainers MUST be removed before operating the washer. • Failure to remove shipping bolts and retainers may cause severe vibration and noise, which can lead to permanent damage to the washer. The cord is secured to the back of the washer with a shipping bolt to help prevent operation with shipping bolts in place. Shipping Bolts 1 Starting with the bottom 2 shipping bolts, use the included wrench to remove the 4 shipping bolts by turning them counterclockwise. Foam Tub Support Carton Base Retainer Hole Cap 2 Remove the retainers by turning them slightly while pulling. Rotate and press the hole caps into the shipping bolt holes. NOTE: Save the bolts and retainers for future use. To prevent damage to internal components, the shipping bolts and retainers must be installed when transporting the washer. MFL62526858_en_100728.indd 11 11 7/28/10 4:20:24 PM