LG WM2140CW Owner's Manual - Page 13

Connecting The Drain Line - drain hose

Page 13 highlights

ENGLISH INSTALLATION INSTRUCTIONS CONNECTING THE DRAIN LINE • The drain hose should always be properly secured. Failure to properly secure the drain hose can result in flooding and property damage. • Do not install the end of the drain hose higher than 96 inches (244.8 cm) above the bottom of the washer. • The drain must be installed in accordance with any applicable local codes and regulations. • Make sure that the water lines are not stretched, pinched, crushed, or kinked. NOTE: If the drain hose is extended more than 4 inches beyond the end of the elbow bracket, mold or microorganisms could spread to the inside of the washer. Option 2: Laundry Tub Elbow Bracket Laundry Tub Drain Hose Tie Strap Clip the end of the hose into the elbow bracket. Hang the end of the drain hose over the side of the laundry tub. Use tie strap to secure the drain hose in place. NOTE: Total height of the hose end should not exceed 96 inches (244.8 cm) from the bottom of the washer. Option 1: Standpipe Elbow Bracket Tie Strap Stand Pipe Drain Hose Clip the end of the hose into the elbow bracket. Insert the end of the drain hose into a standpipe. Use tie strap to secure the drain hose in place. NOTE: Total height of the hose end should not exceed 96 inches (244.8 cm) from the bottom of the washer. Option 3: Floor Drain Drain Hose Floor Drain Insert the end of the drain hose into the floor drain. Secure the hose in place to prevent it from moving. MFL62526858_en_100728.indd 13 13 7/28/10 4:20:29 PM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68

ENGLISH
INSTALLATION INSTRUCTIONS
CONNECTING THE DRAIN LINE
Insert the end of the drain hose into the floor
drain. Secure the hose in place to prevent it
from moving.
Option 3: Floor Drain
Clip the end of the hose into the elbow bracket.
Hang the end of the drain hose over the side of
the laundry tub. Use tie strap to secure the drain
hose in place.
NOTE:
Total height of the hose end should not
exceed 96 inches (244.8 cm) from the bottom of
the washer.
Option 2: Laundry Tub
Laundry
Tub
Elbow
Bracket
Tie
Strap
Drain
Hose
• The drain hose should always be properly
secured. Failure to properly secure the drain
hose can result in flooding and property
damage.
• Do not install the end of the drain hose higher
than 96 inches (244.8 cm) above the bottom of
the washer.
• The drain must be installed in accordance with
any applicable local codes and regulations.
• Make sure that the water lines are not stretched,
pinched, crushed, or kinked.
NOTE:
If the drain hose is extended more than
4 inches beyond the end of the elbow bracket,
mold or microorganisms could spread to
the inside of the washer.
Clip the end of the hose into the elbow bracket.
Insert the end of the drain hose into a standpipe.
Use tie strap to secure the drain hose in place.
NOTE:
Total height of the hose end should not
exceed 96 inches (244.8 cm) from the bottom of
the washer.
Option 1: Standpipe
Drain Hose
Floor Drain
Stand
Pipe
Tie Strap
Elbow
Bracket
Drain
Hose
13
MFL62526858_en_100728.indd
13
7/28/10
4:20:29 PM